Customization: | Available |
---|---|
Bonding Function: | High Temperature Resistant Adhesive |
Morphology: | Solvent |
Still deciding? Get samples of US$ 5.5/kg
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Craft Resin Deep Pour Epoxy Resin Kit 6l Deep Pour Epoxy Resin Crystal Epoxy Resin Deep Pour 30 Cm
Part |
JQ31-9VA |
JQ31-9VB |
Color |
Transparent |
Transparent |
Specific gravity |
1.15 |
0.97 |
Viscosity (25ºC) |
2000-4000 CPS |
50MAXCPS |
Mixing ratio |
A:B=2:1(Weight Ratio) |
|
Hardening conditions |
25°C*48H-72H |
|
Usable time |
25°C*300min(100g) |
Our resin is self leveling, self degassing, low odor, Non-toxic (food safe) and no fumes,contains both a UV stabilizer and advanced additive resistant to yellowing, long lasting. Perfect for mica powder, deep resin molds,alcohol ink, resin pigment or river tables.
2:1 Mixture Resin & Higher Hardness: easy to by volume ratio,resin A to hardener B is 2 :1.After curing, the hardness of this resin is higher, more heat resistant to prevent warping, more wear-resistant and not easy to break. Deep Pour Epoxy Resin Up To 2 Inch:JQ epoxy resin is able to fill gaps more than 2 inches thick at a time.Specially for epoxy resin wood filler applications,such as river bed, table side. Carefully and thoroughly avoiding forming bubbles, 45 minute work time, 48-72 hours cure time (according to your project)
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing,suggest to use the heat curing.
Packaging | Regular packing, Protect by Pallet |
Delivery Port | Tianjin |
Delivery Time | 7-15 working days |